By Amelia Jordan, Research-Sourcing Expert, 7+ Years. Reviewed by Ronald Kelly, Editor

Before you spend a dollar, here’s what determines whether a tirzepatide listing is worth your time: what’s in the vial, what paperwork backs it up, and what you’re really paying per milligram. We call it the 3P check: product, paperwork, and price.

Finnrick, an independent peptide-testing group, published results on 183 tirzepatide vendors across 2,334 lab tests, grading each run from good to bad. The label is a starting point. The COA settles it.

Quick Answer: Tirzepatide Supplier Details at a Glance

What a Tirzepatide Listing Should Tell You

A solid tirzepatide listing answers six questions up front: 

The Basic Product Details

Start with the basics: is this tirzepatide, and how much are you getting? A good listing names the compound, its sequence (tirzepatide is a 39-amino-acid peptide, PubChem CID 156588324), and the milligrams per vial.

Testing Information on the Listing

Next, look for how the vial was tested. Purity from HPLC and identity from LC-MS are the two tests you want named right on the COA.

Research-Use Information

Finally, check the catalog framing. Every compliant supplier states the material is for laboratory research only, not for human or veterinary use, which signals the vendor knows the rules it operates under and sells the vial as a research chemical.

Inside the COA: The Details That Matter

The Certificate of Analysis is the receipt that proves the vial was tested. The results apply to a specific batch, are dated, and clearly disclose the lab that ran the tests. 

Product and Batch Identification

The top of the COA should name the compound and carry a lot or batch number. As peptide-market tester Derek Pruski puts it, batch numbers are the difference between “we test our products” and “we can prove we tested this product.”

Reported Purity

Purity tells you how clean the sample is. It usually shows as an HPLC figure on the COA, often above 99% for tirzepatide. A COA reading “99.2% purity by HPLC” is real tested data, while “99%+ purity” on the website, with no named testing method, is a marketing claim. 

Identity Results

Identity confirms the molecule inside is tirzepatide. It is usually confirmed through LC-MS testing, which measures the compound’s molecular mass in the vial and matches it with the compound’s expected mass. Skip identity testing, and you could be holding, in Pruski’s words, “some random white powder.”

Testing Method and Laboratory

A strong COA names the tests (HPLC, LC-MS) and the lab that ran them. Ideally, these labs should be third-party, independent entities with no stake in the business. That way, they will not have any interest in inflating the result, which an in-house panel likely can. ISO accreditation for these labs is just the cherry on top. 

Date and Report Information

Check the date on the COA report. Labs test per production run, so results vary by batch. You want a recent report matched to your lot. An undated COA, or one from a batch that isn’t yours, tells you little about the vial in hand.

Tirzepatide Testing: From Purity Results to Identity Confirmation

Why HPLC Results Matter

HPLC is the standard purity test, and the number most listings lead with. A high HPLC figure with a real chromatogram behind it is a good sign the vial is clean.

Why Identity Testing Is Separate

A sample can be clean and still be the wrong compound, which is why identity gets its own test. LC-MS confirms the molecular mass matches tirzepatide.

When Additional Testing Appears on a COA

Some vendors publish more than purity and identity. They include heavy metals, sterility, endotoxin, and net-content checks. A few even add an adulterant screen.

Three Tirzepatide Research Suppliers Worth Examining

We put three vendors through the same 3P check: what’s in the vial, what paperwork backs it, and what it costs per milligram. Kylo, PSPeptides, and PeakForm all publish COAs, so here’s how they stack up.

Kylo Peptides

We pulled up Kylo’s GLP-2 (TZ) listing, which comes in 10mg and 30mg vials. Purity is listed at ≥99% by HPLC, LC-MS confirms identity, and every lot ships with a COA matched to the vial number. 

Notably, Kylo runs its testing through four independent labs: Janoshik Analytical, Vanguard, Freedom Diagnostics, and OPTIQ Health Labs, broader third-party coverage than most listings show. The 10mg sits at $99.95, with free shipping over $150 and 24-hour dispatch. 

Everything is labeled research use only. If multi-lab verification is what gives you confidence, Kylo is worth a look.

PSPeptides

PSPeptides lists tirzepatide in seven sizes, from 10mg to 60mg, and the 10mg is the cheapest at $54.99. The COAs sit right on the product page, one per lot, and they go past purity: HPLC, heavy metals, endotoxin, sterility, and a fentanyl screen, each a separate PDF with the lot in the filename (the 10mg we opened was lot NAD-0036019). 

Testing runs through an independent third-party lab, the vials are US-made, and shipping is free on any order. However, the free 2-Day Air upgrade only starts over $200. For the fullest paper trail on the page, PSPeptides is hard to beat.

PeakForm Peptides

PeakForm keeps it simple with four sizes: 10, 20, 30, and 60mg, all in sealed 3mL vials, and the 10mg runs $60.00. Purity is listed above 99%, and each lot has its own COA in a public library you can search by size. The listed panel covers purity, weight, and endotoxin. Shipping is free 2-day shipping over $100. For a clean listing with public COAs, PeakForm fits.

Tirzepatide Prices 

Two tirzepatide listings can show very different prices depending on the vial size, price per milligram, and shipping, not necessarily just quality. 

Vial Size Changes the Comparison

A $55 vial and a $200 vial can be the same value once you factor in how many milligrams each holds. Bigger vials usually cost more up front and less per milligram. A low sticker price is often just the smaller vial.

Price Per Milligram Gives More Context

Price per milligram is listed price divided by labeled milligrams. On the 10mg vial, PSPeptides comes to $5.50/mg, PeakForm to $6.00/mg, and Kylo to $10.00/mg. Larger vials drop it further: Kylo’s 30mg is $8.33/mg, and PSPeptides’ 60mg gets reduced to about $3.33/mg.

Shipping and Other Costs

PeakForm ships free 2-day over $100, PSPeptides free on any order (2-Day Air over $200), and Kylo free over $150. Add the price per milligram, and the cheapest-looking option isn’t always the cheapest.

Current Supplier Pricing

For context, compounded tirzepatide once ran roughly $150 to $300 a month while brand-name versions topped $1,000, a big reason buyers price-shop research listings so hard.

What You Should Check Before Buying Tirzepatide peptide for Research

Research purchases leave a longer paper trail than one certificate.

Product Information

The product information on the website includes the compound name and sequence, vial size, purity claim, and listed test methods.

Certificate of Analysis

The COA is the core document. Download the PDF for your vial lot if the vendor posts one. 

Lot or Batch Information

Write down the lot number printed on the vial. It will help you identify your lot’s specific COA. 

Testing Laboratory Information

Note which lab ran the tests. When a vendor names its labs, like Kylo listing Janoshik, Vanguard, Freedom Diagnostics, and OPTIQ Health Labs, you can record exactly who did the analysis and point to it later.

Order and Shipping Records

Keep the order confirmation and shipping email. They date the purchase and connect it to the batch you received, completing the trail from checkout to vial.

Red Flags To Avoid

Most of the time, a quick check goes smoothly. Sometimes, a listing has gaps, so slow down and clear them before finalizing your purchase. 

The COA Cannot Be Found.

If a page advertises testing but the COA is nowhere to be seen, ask the vendor. A supplier that tests its batches usually has the paperwork ready to share.

The Batch Number Is Missing

A COA with no lot number can’t be associated with your vial. It might be real and still tell you nothing about what you received. Ask which batch it covers before deciding.

The COA Does Not Match the Product

Sometimes the certificate names a different compound, size, or lot than the listing. Clear up that mismatch. A quick message asking for the matching COA usually sorts it out.

Purity Is Listed Without a Measured Result

A purity claim with no test behind it is just a claim. Look for the HPLC result that supports it. Ask to see the data.

The Testing Laboratory Is Unclear

When a listing says “third-party tested” but never names the lab, you’re taking the faith claim. It’s fair to ask who did the testing. Naming the lab is easy for vendors that use one. 

The Product Description Is Incomplete

A listing that skips the compound details, the milligrams, or the test methods leaves you guessing. Fill in the blanks before you buy. A complete description is the easiest green light.

Essential Criteria for Evaluating Tirzepatide Peptide Suppliers

Here’s how the three suppliers we reviewed compare on the details that decide a purchase.

Product Information

All three sell lyophilized tirzepatide labeled research use only. PSPeptides offers seven sizes, PeakForm four, and Kylo two, so PSPeptides has the most options if vial size is your main selection criterion. 

Testing and COA Access

Every vendor posts COAs. PSPeptides puts per-lot PDFs on the product page, PeakForm keeps a searchable public library, and Kylo publishes a lot-matched library backed by four named labs.

Lot Traceability

PSPeptides shows lot numbers in its COA filenames, and Kylo and PeakForm tie each certificate to a batch you match against your vial, so all three connect vial to paperwork.

Pricing and Quantity

PSPeptides leads on the 10mg at $54.99, then PeakForm at $60.00 and Kylo at $99.95. Per milligram, PSPeptides’ 60mg is the lowest at about $3.33/mg.

Shipping and Ordering Information

PeakForm has the lowest free-shipping threshold at $100, PSPeptides ships free on every order, and Kylo is free over $150 with 24-hour dispatch.

What to Keep After Ordering Tirzepatide Peptide

Ordering is half the job. The other half is keeping the records that describe what you bought.

Save the Product Page

Take a screenshot or save the page of the product you ordered. It captures the compound, size, purity claim, and test methods as they were listed.

Keep the COA

Download the COA that matches your lot and store it with your order file. A saved PDF is accessible anytime, unlike a link that could move or expire.

Record the Lot Number

Note the lot number from the vial as soon as it arrives. It’s the key that connects your vial to its certificate.

Keep the Order Confirmation

Save the order confirmation and shipping email. They date the purchase and tie it to the batch you received.

Match the Documentation When the Shipment Arrives

When the package lands, check the lot on the vial against the lot on the COA. If they match, your paperwork is complete; if they don’t, contact the vendor.

FAQs About Buying Tirzepatide Peptide

Why can the same tirzepatide quantity have different COA formats?

Different labs and vendors lay out certificates differently, so two 10mg COAs can look nothing alike. What matters is the content. Check that purity, identity, lot number, method, lab, and date are all present, whatever the template.

Can testing information change from one production lot to another?

Yes. Each batch is tested on its own, so purity figures and other results vary slightly from lot to lot. That’s normal, and it’s why lot-matched COAs exist. Always read the certificate tied to your specific batch.

Why might a supplier publish some test results but not others?

Vendors choose how much of the panel to post. Some show only purity and identity, while others add heavy metals, sterility, and endotoxin. A fuller published set gives you more to check, so it counts in a vendor’s favor when the data is there.

Should the product page and COA use identical wording?

They should line up on the facts: the same compound, size, and lot. The wording can differ, since a product page is marketing and a COA is a lab document. If the core details clash, ask the vendor to clear it up.

Why does the testing date matter on a COA?

A COA describes one batch at one point in time. A recent date matched to your lot tells you the result reflects the vial you have. An old or undated certificate, or one from another batch, gives you far less to go on.

What should be saved with a research-material purchase?

Keep the product page, the lot-matched COA, the lot number, and the order and shipping confirmations. Together, they connect the vial to its data from checkout onward, making the purchase traceable later.

Final Thoughts: Look at the Product, the Paperwork, and the Price

Run any tirzepatide listing through the same three checks before buying: 

1. Product: what’s in the vial, down to the compound and the milligrams. 
2. Paperwork: the COA, with purity, identity, a named lab, and a matching lot number.
3. Price: what you pay per milligram once shipping is in.

Of the suppliers we reviewed, Kylo leads on multi-lab verification with its four named labs, PSPeptides posts the fullest paper trail and the lowest per-milligram cost on bulk vials, and PeakForm offers a clean listing with the lowest free-shipping threshold. 

Start with the vendor whose documentation gives you the most confidence, match the vial to its COA when it arrives, and you’ve run the 3P check right.

Disclaimer: The products discussed here are sold as research-grade laboratory materials. The U.S. Food and Drug Administration has not evaluated these statements, and nothing in this guide is medical advice.

Stay updated, free articles. Join our Telegram channel

Join